Use Your Xbox 360 Headset

Setup

To set up the headset:

1. Turn down the volume by rotating the volume control all the way to the left.
2. Insert the 2.5-mm headset connector into the controller expansion port at the back of your game controller.
   
   
3. Put on your headset and adjust the microphone.

   Note

   Correct placement of the headset and microphone is critical to using your headset successfully. Make sure the headset goes over the top of your head, not around the back of your head. You may rotate the microphone and earpiece to your right or left side. Position the microphone about one inch (2.54 cm) from your mouth and off to one side. This will ensure that it doesn't transmit your breathing into a chat session. As you adjust the microphone, make sure the microphone opening is pointed towards your mouth and not rotated on its axis.

   
   
   
4. Now the headset is ready for a game or chat session. Start your game or chat and turn the volume up to a comfortable level.

Mute

To temporarily turn off voice transmission, press the mute button on the headset cable connector.

Volume Adjustment

To adjust the listening volume of the headset, rotate the volume control knob.

Games

For information about using your Xbox 360 Headset with a particular game, see your game manual.

If you encounter problems with your headset, see Troubleshoot Your Xbox 360 Headset.