Inserting Batteries

To insert batteries into the Xbox 360™ Media Remote:

1. Remove the remote battery cover.
2. Insert two new AA (LR6) batteries as shown on the underside of the remote battery cover. For best performance, AA rechargeable batteries are not recommended.
3. Replace the remote battery cover.

The media remote lets you control DVD movie features and other media functions of your Xbox 360 video game and entertainment system.

To play DVD movies:

1. Press the eject button to open the disc tray.
2. Place the DVD movie on the disc tray with the label facing out.
3. Press the eject button to close the disc tray. The DVD movie will begin playing.

The Xbox 360 console can play only region 1 DVDs.

Some DVDs may not support all DVD playback features of the Xbox 360 video game and entertainment system, such as subtitles, multilingual audio tracks, multiple viewing angles, and slow-motion play.

For more information about supported features, see the producer's documentation for the DVD in question. In rare instances, certain DVDs may not operate properly. This is due primarily to variations in the manufacturing process or software encoding of the DVD video software.

Make sure your AV cable is properly connected. For setup and AV troubleshooting information, see the Xbox 360 Setup manual, your AV cable instructions, or Troubleshoot Audio/Video Connections.

Make sure the batteries are still fresh by testing the remote with new batteries. Try removing the batteries from the remote, pressing all buttons twice, and then replacing the batteries.

• Make sure that you have fresh batteries in the remote.
• Point the remote directly at the infrared sensor adjacent to memory unit slot A.
• Check to verify that the infrared sensor is not blocked or covered.
• Make sure that you're using the remote within 10 feet of the infrared sensor.
• Close drapes and blinds during daylight hours to minimize ambient infrared.